IPQ6000 802.11AX AX1800 Gigabit Ports Wifi 6 5G Router Powerful Industrial Outdoor IP67 enclosure

Model: Z6001AX-H This one is a 5G router mainly for outdoor using, with IP67 enclosure, waterproof, adopting IPQ6000 chipset, 1800Mbps dual bands, Gigabit ports, 1 WAN and 3 LAN

details


Wifi 6 and 5G router, Z6001-M.2-H, with IP67 housing, mainly for outdoor using, adopting IPQ6000 chipset, 1 WAN and 3 LAN Gigabit Ports, 1800Mbps Gigabit ports, powerful performance.


Introduction to the hardware interface

ProcessorIPQ6000, 4-Core ARM Cortex A53s CPU, 1.2GHZ Main Frequency
2.4GWIFI chipsetQCN5022, IEEE 802.11ax/n/g/b,Speed up to 573.5Mbps,2T2R
5.8GWIFI chipsetQCN5052  IEEE 802.11ax/ac/a,Speed up 1201Mbps,2T2R
RamDDR3 256MB(One DDR matches 32bit firmware
Flash128MB NAND FLASH
Ethernet PortWAN*1, 1000Mbps(Auto MDI/MDIX),IEEE 802.3/802.3u/802.ab
LAN*3, 1000Mbps(Auto MDI/MDIX, IEEE 802.3/802.3u/802.ab
Power PortDC5.5*2.1MM
ButtonsReset Button* 1, MESH Button*1
AntennasOnmidirectional External 5dbi 2.4G antennas*2
Onmidirectional External 5dbi 5.8G antennas*2
SIM CardStandard SIM card Slot *1, Support SIM/USIM
AntennasOmnidirectional 3dbi 2.4G antenna*2
Omnidirectional 3dbi 5.8G antenna*2
Omnidirectional 3dbi 5Gantennas*4,  support 4G/3G/2G bands
M.2 SlotBuilt-in M.2*1, Support USB3.0 and PCIE Bus, support 5G module

Introduction to indicator lights


 1. The red light is on during the boot process, the boot is complete, the red light is off and the green light is on

2. Press the mesh button to enter the mesh pairing state, the green light flashes once a second, and the other lights are off

3. The main equipment network is normal, the green light and blue light are on at the same time (cyan)
MESH LEDThe slave device MESH is successfully connected, and the distance is longer, the green light and the red light are on at the same

time (orange), the distance is suitable for the green light and the blue light is on at the same time (cyan)
WAN LEDWhen connecting the WAN ports, the LED light will be always on, and the LED will be flashing when there is data communication
LAN1 LEDWhen connecting the LAN ports, the LED light will be always on, and the LED will be flashing when there is data communication
LAN2 LEDWhen connecting the LAN ports, the LED light will be always on, and the LED will be flashing when there is data communication
LAN3 LEDWhen connecting the LAN ports, the LED light will be always on, and the LED will be flashing when there is data communication
POWR LEDwhen the power supply is normal, the power indicator is always on, and it wont be on when the power supply is abnormal.

Introduction to hardware watchdog function

This hardware product is designed with a hardware watchdog function. The hardware watchdog will automatically turn on after power-on, and detect the heartbeat level output by the routing system that jumps once per second. If the routing system itself fails (such as a crash), it will also Naturally, the heartbeat level can no longer be output. At this time, if the hardware watchdog does not detect the heartbeat level within 120 seconds, it will shut down itself for 15 seconds and then restart the entire system.

Hardware watchdog specific functions
Routing system is abnormalModule dialing abnormal
Restart the whole systemOnly restart the module








TAGS

RELATED PRODUCTS