WG1402 is a Three SIM cards 3G 4G LTE routing product, it is developed for high network security, it accesses the Internet through any 4G sim card or through 1000Mbps WAN port, and then shares the Internet network via wireless WiFi 5 or 1000M LAN Ports. Selling Point lAdopting Qualcomm chipset IPQ4019, quad-core ARM Cortex-A7 CPU, main frequency up to 800MHZ l The main chipset IPQ4019 integrates 2.4Ghz and 5.8Ghz wifi bands, both 2.4Ghz and 5.8Ghz support MU-MIM lUsing High Speed configuration, 256MB DDR3, 32MB Nor Flash l1WAN and 4LAN, all 1000M adaptive network ports, support automatic flip (Auto MDI/MDIX) lSupporting USB3.0 storage device, can be used to expand SMABA or FTP network storage function lSupport "One-key flash mode", that is, when the reset button is long pressed, the router will enter to the upgrading firmware mode lBuilt-in 3*mini-PCIe slots, it can be installed maximum 3pcs 4G modules lSupporting 3pcs Nano SIM slot, supports SIM/USIM lWith external removable SMA Port high gain omnidirectional antennas, realizing all-round wifi coverage |
Hardware
Processor | IPQ4019 Chipset, Quad Core ARM Cortex-A7 CPU, main frequency 761.8MHZ |
2.4G WIFI | IPQ4019 integrated 2.4G WIFI baseband, IEEE 802.11n/g/b, 400mps |
5.8G WIFI | IIpq4019 integrated 5.8G WiFi baseband, IEEE 802.11a/ac, 867mbps |
RAM | DDR3 256MB |
Flash | Nor Flash 32MB |
NAND Flash (Support Customizable firmware) |
Ethernet interface | 1* Wan port, 1000Mbps, Support Auto MDI/MDIX |
Protocol: IEEE 802.3/802.3u/802.ab | |
4* Lan ports, 1000Mbps, Support Auto MDI/MDIX | |
Protocol: IEEE 802.3/802.3u/802.ab | |
USB | 1*USB3.0 |
SIM slot | 3*Standard Nano SIM card slot(Smalleset sim card), |
support Nano SIM/USIM | |
Powder interface | DC5.0*2.1MM DC port |
Botton | 1*reset button |
Antennas | 2*omnidirectional 5dbi 2.4G & 5.8G dual-band antennas |
6*omnidirectional 5dbi 2.4G & 5.8G dual-band antennas | |
PCIE | Built-in 3*4G PCIE module interfaces ,Support install 3pcs 4G module at the same time |
LAN1 | Light on: connect the network port |
LAN2 | Flashing: data is communicating |
LAN3 | |
LAN4 | |
WAN | Light on: connect the network port |
Flashing: data is communicating | |
Power | Light on: Power on |
Light off: power supply is not connected or failed | |
5.8G WIFI | Light on: always on when 5.8G WiFi function |
Light flashing: data is communicating | |
Light off: 5.8G WiFi is not turned on or 5.8G WiFi is faulty | |
2.4G WIFI | Light on: always on when 2.4G WiFi function |
Light flashing: data is communicating | |
Light off: 2.4G WiFi is not turned on or 2.4 WiFi is faulty | |
4G1 | Light on: 4G module is working |
4G2 | Light off: 4G module is not installed or 4G module is faulty |
4G3 |
Working Environment
Operating temperature | 0℃ -40℃ |
Storage temperature | -40℃-70℃ |
Operating humidity | 10% -90%RH Non-condensing |
Working humidity | 5%- 90%RH Non-condensing |
oftware Configuration Information
Default IP | 192.168.1.1 |
Usres/Password | root/admin |
2.4G SSID | WIFI-XXXXXX (X is the last 6 Number of MAC address), no password by default |
5.8G SSID | WIFI-5G-XXXXXX (X is the last 6 Number of MAC address), no password by default |